A screw gauge gives the following reading when used to measure the diameter of a wire.
Main scale reading : $$0 \,mm$$
Circular scale reading : $$52$$ divisions
Given that 1 $$mm$$ on main scale corresponds to $$100$$ divisions of the circular scale. The diameter of wire from the above data is:
A quantity $$X$$ is given by $${\varepsilon _0}L\frac{{\Delta V}}{{\Delta t}}$$ where $${ \in _0}$$ is the permittivity of the free space, $$L$$ is a length, $$\Delta V$$ is a potential difference and $$\Delta t$$ is a time interval. The dimensional formula for $$X$$ is the same as that of-
Pressure depends on distance as, $$P = \frac{\alpha }{\beta }exp\left( { - \frac{{\alpha z}}{{k\theta }}} \right),$$ where $$\alpha ,$$ $$\beta $$ are constants, $$z$$ is distance, $$k$$ is Boltzman’s constant and $$\theta $$ is temperature. The dimension of $$\beta $$ are-